Material Safety Data

Safety Data


Silicone rubber for mold making

Trade name: Silicone rubber
Relevant identified uses of the substance or mixture and uses advised against

Application of the substance / the mixture:
For silicone mould making and other silicone rubber products making

Poison Control 1-800-222-1222 (in the U.S.)


Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
The product is not classified according to the CLP regulation.
Information concerning particular hazards for human and environment:

The product has not to be labelled due to the calculation procedure of Regulation (EC) No. 1272/2008.
Classification system:

The classification is according to the latest edition of EU Regulation (EC) No. 1272/2008, and extended by
Label elements

Labelling according to Regulation (EC) No. 1272/2008 Void
Hazard pictograms Void
Signal word Void
Hazard statements Void
Other hazards:
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.


Composition - Proprietary


Mixture of the substances listed below with nonhazardous additions.

All ingredients listed above are not classified according to Regulation (EC) No. 1272/2008.


First Aid

Description of first aid measures
General description: No special measures required.
After inhalation: Supply fresh air; consult doctor in case of complaints.
After skin contact: Generally the product does not irritate the skin.
After eye contact: Rinse opened eye for several minutes under running water.
After swallowing: If symptoms persist consult doctor.
Most important symptoms and effects, both acute and delayed:
No further relevant information available.
Indication of any immediate medical attention and special treatment needed:
No further relevant information available.


Firefighting Measures      

Extinguishing media
Suitable extinguishing agents: Use fire extinguishing methods suitable to surrounding conditions.
Special hazards arising from the substance or mixture: No further relevant information available.
Advice for firefighters
Protective equipment: No special measures required.


Accidental Measures 

Personal precautions, protective equipment and emergency procedures: Not required.

Environmental precautions: Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:

Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Reference to other sections:



Precautions for safe handling:
No special measures required.
For the general occupational hygienic measures refer to Section 8.
Information about fire - and explosion protection: No special measures required.
Conditions for safe storage, including any incompatibilities
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.

Further information about storage conditions: None.
Specific end use(s): No further relevant information available.


Exposure and Protection
Control parameters
Ingredients with limit values that require monitoring at the workplace:

The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.
DNELs: Not available
PNECs: Not available
Additional information: The lists valid during the making were used as basis.
Exposure controls

Based on the composition shown in Section 3, the following measures are suggested for occupational safety
measureAppropriate engineering controls: See Section 7 for information about design of technical facilities.
· Personal protective equipment
· Respiratory protection: Not required.
· Protection of hands: Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.

  1. Material of gloves
    The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
  2. Penetration time of glove material:
    The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
  3.  Eye protection: Goggles recommended during refilling
  4.  Environmental exposure controls:
    Control measures must be made in accordance with Community environmental protection

Information on basic physical and chemical properties

Form: Liquid

pH-value: Not available
Change in condition
Melting point/Freezing point: Not available
Initial boiling point and boiling range: Not available

Flash point: Not available
Flammability (solid, gas): Not available


· Auto-ignition temperature: Not available
· Decomposition temperature: Not available
· Self-igniting: Product is not self-igniting.
· Explosive properties: Product does not present an explosion hazard.



Reactivity: Data not available
Chemical stability: Data not available
Possibility of hazardous reactions: No dangerous reactions known.
Conditions to avoid: No further relevant information available.
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known.


Toxicological Information

Information on toxicological effects
Acute toxicity Based on available data, the classification criteria are not met.


Ecological Information

Aquatic toxicity: No further relevant information available.
Persistence and degradability: No further relevant information available.
Bioaccumulative potential: No further relevant information available.
Mobility in soil: No further relevant information available.
PBT: Not applicable.
vPvB: Not applicable.
Other adverse effects No further relevant information available.
Additional ecological information:
General notes:
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water

Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.


Waste treatment methods
Recommendation: Smaller quantities can be disposed of with household waste.
Uncleaned packaging
Recommendation: Disposal must be made according to official regulations.



Transport/Additional information: Not dangerous according to the above specifications.

Rugulatory Information

 · Directive 2012/18/EU
· Named dangerous substances - ANNEX I None of the ingredients is listed.
· Seveso category Not applicable
· Qualifying quantity (tonnes) for the application of lower-tier requirements Not applicable
· Qualifying quantity (tonnes) for the application of upper-tier requirements Not applicable
· National regulations:
· Waterhazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water.
· Other regulations, limitations and prohibitive regulations
· SVHC Candidate List of REACH Regulation Annex XIV Authorisation (15/1/2019)

None of the ingredients is listed

· REACH Regulation Annex XVII Restriction (17/12/2018)

None of the ingredients is listed
· REACH Regulation Annex XIV Authorisation List (13/6/2017)
None of the ingredients is listed
· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.

The contents and format of this SDS are in accordance with Regulation (EC) No 1907/2006, 1272/2008 and
Regulation (EU) No 2015/830.
Food Safety
For untinted translucent silicone
FDA CANEC19-157899.001 - PASS

Designed to be nontoxic, GMO-free, and safe for skin contact, our finely ground cosmetic-grade mica powder is made from natural mica. 

The Crushed Crystal and the 24K gold are enhanced with (plastic free) synthetic components for higher purity and less black spots, better weather proof, higher luster and higher stability when exposed to higher temperatures.

Hazard classification: not classified



Proprietary, please contact us if this information is needed.


Description of first aid measures:

In case of inhalation: remove to fresh air and keep at rest

Skin contact: will wash off with soap and water

Eye contact: flush gently with water. If eye irritation occurs seek medical attention/advice

If ingested: wash out mouth, drink water or milk

Avoid breathing in dust particles


Firefighting Measures:

Extinguish with water spray, foam or dry chemical

Unsuitable to extinguish with carbon dioxide

Fire fighters should wear protective clothing and breathing apparatus


Accidental Release Measures:
Do not breath in dust

Do not allow to enter drains and sewers


Handling and Storage:

Avoid breathing dust

Exposure Controls

provide adequate ventilation


Physical and Chemical Properties:


Insoluble in water.

Not classified as dangerous goods


Stability and Reactivity:

Stable under normal conditions
avoid direct high temperatures

Toxicological information:

non toxic


Ecological Information:
Non soluble in water
other: not applicable


Dispose of contents in accordance with local and state legislation


Not classified as dangerous goods
Regulatory Information:
According to directive 67/548/EEC & Directive 1999/45/EC not classified as dangerous for use
Other information: